Home position seek error (error code: 034001)

Cause

Occurs if the home position seek failed.

Suspected cause
  • Paper jam or foreign object (in CR operation area)
  • CR lock lever failure (Maintenance Unit failure)
  • Inksystem gear train part damaged
Troubleshooting
Step Confirmation and action Yes No
1

Check for paper jam and foreign object
Check the CR scanning area. Was there any paper jam or foreign object?

 Go to step 2

Remove the jammed paper or foreign object.
2

Check the CR lock lever operation
Turn on the power and check the operation of the CR lock lever. Is the CR lock lever operating normally?

Contact the Epson Service Support department.

Replace the Maintenance Unit